Teknik Belgeler
Özellikler
Elektrolit Tipi
Katı
Tolerance Minus
-10%
Minimum Çalışma Sıcaklığı
-55°C
Tolerance Plus
+10%
Maksimum Çalışma Sıcaklığı
+125°C
Terminal Tipi
Yüzeye Monte
Teknoloji
MnO2
Montaj Tipi
Yüzeye Monte
Uzunluk
3.5mm
Derinlik
2.8mm
Tolerans
±10%
Gerilim
6.3V dc
Yükseklik
1.9mm
Dağılım Faktörü
6%
Kaçak Akımı
1,3 μA
Kapasitans
22µF
Boyutlar
3.5 x 2.8 x 1.9mm
Paket/Kılıf
3528-21
Eşdeğer Seri Direnci
600mΩ
Marka
VishaySeri
593D
Ürün Ayrıntıları
DICON touch - Process- and Program Controller Software
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
Standart
10
![sticker-359](https://cms.rsdelivers.com/repository-v1/yeniiyifiyat.gif)
P.O.A.
Standart
10
![sticker-359](https://cms.rsdelivers.com/repository-v1/yeniiyifiyat.gif)
Teknik Belgeler
Özellikler
Elektrolit Tipi
Katı
Tolerance Minus
-10%
Minimum Çalışma Sıcaklığı
-55°C
Tolerance Plus
+10%
Maksimum Çalışma Sıcaklığı
+125°C
Terminal Tipi
Yüzeye Monte
Teknoloji
MnO2
Montaj Tipi
Yüzeye Monte
Uzunluk
3.5mm
Derinlik
2.8mm
Tolerans
±10%
Gerilim
6.3V dc
Yükseklik
1.9mm
Dağılım Faktörü
6%
Kaçak Akımı
1,3 μA
Kapasitans
22µF
Boyutlar
3.5 x 2.8 x 1.9mm
Paket/Kılıf
3528-21
Eşdeğer Seri Direnci
600mΩ
Marka
VishaySeri
593D
Ürün Ayrıntıları
DICON touch - Process- and Program Controller Software
The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.