Wago, PLC Programlama Yazılımı, 759 Serisi ile kulanım için vSP3, Windows 7, Windows XP için
Teknik Belgeler
Özellikler
Marka
WagoAksesuar Tipi
PLC Programming Software
Seri
759
Şununla Birlikte Kullanım İçin
759 Serisi
Menşe
Germany
Ürün Ayrıntıları
WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.
Wago I/O system range
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
WagoAksesuar Tipi
PLC Programming Software
Seri
759
Şununla Birlikte Kullanım İçin
759 Serisi
Menşe
Germany
Ürün Ayrıntıları
WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.