24V dc S8VM DIN Ray Pano Montaj Güç Kaynağı, 24V dc / 24V dc, 14A 300W, Anahtarlama Modu

Part Number S8VM-30024C

• The S8VM Switch mode, Bottom-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-30024C has a power rating of 300 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This standard model incudes green output indicators plus has a fan providing forced air cooling. A power failure alarm notifies you of output voltage errors.

Bottom mounted power supplies can be front mounted using the correct mounting bracket for 300 w, 600 W and 1500 W models. Part number S8VM-30024 C can be front mounted using a DIN Rail mounting bracket series S82Y-VM. Brackets are sold separately – see example stock number <a href="JavaScript:showLine('818-6815')"><span class="inlineLink">818-6815</span></a>.

Features and Benefits.

• Covered type power supply
• Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• Bottom mount
• Green output indicators
• Forced air cooled – built in fan
• Power rating 300 W
• Output voltage 24 V dc
• Input voltage 100 V ac to 240 V ac
• Remote control function
• Parallel operation (up to 2 power supplies)
• Harmonic current emissions
• Efficiency 81% min.
• Frequency 50/60 Hz
• Rated output current 14 A / 16.5 A (peak current at 200 V ac)
• Power failure alarm – Open collector, 30 V dc maximum (50 mA maximum)
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

• A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

• Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

• Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge.
• Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
• Shock resistance 150 m/s **2 in each 6 directions 3 times.

Notes

Customer Warning.
The Safety standards will not apply if you replace the fan on this part number.

Standards

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No.213, EN50178, EN60950-1, Harmonic current emissions E 61000-3-2