Teknik Belgeler
Özellikler
Marka
Renesas ElectronicsÜrün Tipi
Saat Buffer
Maksimum Giriş Frekansı
133MHz
Maksimum Yayılım Gecikme Süresi
250ps
Montaj Tipi
Yüzey
Paket Tipi
SOIC
Pim Sayısı
8
Minimum Besleme Gerilimi
3V
Maksimum Besleme Gerilimi
3.6V
Minimum Çalışma Sıcaklığı
0°C
Maksimum Çalışma Sıcaklığı
70°C
Uzunluk
5mm
Yükseklik
1.75mm
Standartlar/Onaylar
No
Seri
2305-1DCG
Otomotiv Standardı
NO
Ürün Ayrıntıları
The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Tube of 97) (KDV Hariç)
97
Teklif İsteyiniz
Each (In a Tube of 97) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
97
Teknik Belgeler
Özellikler
Marka
Renesas ElectronicsÜrün Tipi
Saat Buffer
Maksimum Giriş Frekansı
133MHz
Maksimum Yayılım Gecikme Süresi
250ps
Montaj Tipi
Yüzey
Paket Tipi
SOIC
Pim Sayısı
8
Minimum Besleme Gerilimi
3V
Maksimum Besleme Gerilimi
3.6V
Minimum Çalışma Sıcaklığı
0°C
Maksimum Çalışma Sıcaklığı
70°C
Uzunluk
5mm
Yükseklik
1.75mm
Standartlar/Onaylar
No
Seri
2305-1DCG
Otomotiv Standardı
NO
Ürün Ayrıntıları
The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.