Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsÜrün Tipi
Hall Etki Algılayıcısı
Sensör Tipi
Hall Etkisi Sensörleri
Teknoloji
BiCMOS
Montaj Tipi
Yüzey
Manyetik Tipi
Tek Kutuplu
Minimum Besleme Gerilimi
3.8V
Paket Tipi
SOT-23
Maksimum Besleme Gerilimi
24V
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
85°C
Genişlik
1.91 mm
Seri
A1101
Yükseklik
0.95mm
Uzunluk
2.98mm
Standartlar/Onaylar
No
Besleme Akımı
7.5mA
Yanıt Süresi
4μs
Otomotiv Standardı
AEC-Q100
Ürün Ayrıntıları
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
1.041,00 TL
41,64 TL Each (Supplied on a Reel) (KDV Hariç)
1.249,20 TL
49,968 TL Each (Supplied on a Reel) KDV Dahil
Üretime Uygun Paketleme (Makara)
25

1.041,00 TL
41,64 TL Each (Supplied on a Reel) (KDV Hariç)
1.249,20 TL
49,968 TL Each (Supplied on a Reel) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
Üretime Uygun Paketleme (Makara)
25

| Miktar | Birim Fiyat | Per Makara |
|---|---|---|
| 25 - 95 | 41,64 TL | 208,20 TL |
| 100 - 245 | 39,12 TL | 195,60 TL |
| 250 - 495 | 38,16 TL | 190,80 TL |
| 500+ | 37,20 TL | 186,00 TL |
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsÜrün Tipi
Hall Etki Algılayıcısı
Sensör Tipi
Hall Etkisi Sensörleri
Teknoloji
BiCMOS
Montaj Tipi
Yüzey
Manyetik Tipi
Tek Kutuplu
Minimum Besleme Gerilimi
3.8V
Paket Tipi
SOT-23
Maksimum Besleme Gerilimi
24V
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
85°C
Genişlik
1.91 mm
Seri
A1101
Yükseklik
0.95mm
Uzunluk
2.98mm
Standartlar/Onaylar
No
Besleme Akımı
7.5mA
Yanıt Süresi
4μs
Otomotiv Standardı
AEC-Q100
Ürün Ayrıntıları
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.


