Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsÜrün Tipi
Hall Etki Algılayıcısı
Sensör Tipi
Hall Etkisi Sensörleri
Teknoloji
BiCMOS
Montaj Tipi
Deliğe Takılan
Manyetik Tipi
Tek Kutuplu
Minimum Besleme Gerilimi
3.8V
Paket Tipi
Ultra Mini SIP
Maksimum Besleme Gerilimi
24V
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
85°C
Yükseklik
3.02mm
Standartlar/Onaylar
No
Seri
A1104
Uzunluk
4.09mm
Besleme Akımı
7.5mA
Otomotiv Standardı
AEC-Q100
Yanıt Süresi
4μs
Ürün Ayrıntıları
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
297,60 TL
59,52 TL Each (In a Pack of 5) (KDV Hariç)
357,12 TL
71,424 TL Each (In a Pack of 5) KDV Dahil
Standart
5

297,60 TL
59,52 TL Each (In a Pack of 5) (KDV Hariç)
357,12 TL
71,424 TL Each (In a Pack of 5) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
Standart
5

| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 5 - 20 | 59,52 TL | 297,60 TL |
| 25 - 95 | 49,408 TL | 247,04 TL |
| 100 - 245 | 41,472 TL | 207,36 TL |
| 250 - 495 | 38,784 TL | 193,92 TL |
| 500+ | 36,48 TL | 182,40 TL |
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsÜrün Tipi
Hall Etki Algılayıcısı
Sensör Tipi
Hall Etkisi Sensörleri
Teknoloji
BiCMOS
Montaj Tipi
Deliğe Takılan
Manyetik Tipi
Tek Kutuplu
Minimum Besleme Gerilimi
3.8V
Paket Tipi
Ultra Mini SIP
Maksimum Besleme Gerilimi
24V
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
85°C
Yükseklik
3.02mm
Standartlar/Onaylar
No
Seri
A1104
Uzunluk
4.09mm
Besleme Akımı
7.5mA
Otomotiv Standardı
AEC-Q100
Yanıt Süresi
4μs
Ürün Ayrıntıları
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.


