Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsÜrün Tipi
Hall Etki Algılayıcısı
Sensör Tipi
Hall Etkisi Sensörleri
Teknoloji
Chopper Stabilize Hassas Hall Etkisi
Montaj Tipi
Deliğe Takılan
Manyetik Tipi
Tek Kutuplu
Maksimum Frekans Yanıtı
800kHz
Minimum Besleme Gerilimi
3V
Paket Tipi
SIP
Maksimum Besleme Gerilimi
24V
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
150°C
Yükseklik
3.02mm
Uzunluk
4.09mm
Standartlar/Onaylar
100% matte tin plated, Pb-Free
Seri
A1120
Besleme Akımı
4mA
Otomotiv Standardı
AEC-Q100
Yanıt Süresi
25μs
Ürün Ayrıntıları
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
286,08 TL
57,216 TL Each (In a Pack of 5) (KDV Hariç)
343,30 TL
68,659 TL Each (In a Pack of 5) KDV Dahil
Standart
5

286,08 TL
57,216 TL Each (In a Pack of 5) (KDV Hariç)
343,30 TL
68,659 TL Each (In a Pack of 5) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
Standart
5

| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 5 - 20 | 57,216 TL | 286,08 TL |
| 25 - 95 | 40,192 TL | 200,96 TL |
| 100 - 245 | 33,792 TL | 168,96 TL |
| 250 - 495 | 33,024 TL | 165,12 TL |
| 500+ | 32,256 TL | 161,28 TL |
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsÜrün Tipi
Hall Etki Algılayıcısı
Sensör Tipi
Hall Etkisi Sensörleri
Teknoloji
Chopper Stabilize Hassas Hall Etkisi
Montaj Tipi
Deliğe Takılan
Manyetik Tipi
Tek Kutuplu
Maksimum Frekans Yanıtı
800kHz
Minimum Besleme Gerilimi
3V
Paket Tipi
SIP
Maksimum Besleme Gerilimi
24V
Minimum Çalışma Sıcaklığı
-40°C
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
150°C
Yükseklik
3.02mm
Uzunluk
4.09mm
Standartlar/Onaylar
100% matte tin plated, Pb-Free
Seri
A1120
Besleme Akımı
4mA
Otomotiv Standardı
AEC-Q100
Yanıt Süresi
25μs
Ürün Ayrıntıları
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.


