Artesyn, 250W SMPS (Anahtarlamalı Güç Kaynağı), 1 Çıkışlı, 10,4A

Artesyn Embedded Technologies Embedded Switch Mode Power Supply

The Artesyn Embedded Technologies LPS255-C series embedded switch-mode power supply is 250W, AC to DC plug-in device with a single output. This power supply has active power factor correction, a low output ripple and a built-in EMI filter. It has a universal input supply voltage rating ranging between 85VAC and 264VAC or 120VDC and 300VDC.
Note:
These AC/DC power supplies are not convection rated, therefore, stock numbers 192-1201, 192-1223, 192-1239 and 192-1267 which are not supplied with a fan require the user to provide 30CFM forced air cooling through the length of the power supply
Derating ranging between 50°C and 70°C is 2.5% per °C
Suitable connecting kit for this AC/DC power supply: stock number 151-717

Features and Benefits

• Chassis mount
  Efficiency is 75% typical at full load
  Enclosed package type
  Output current is 10.4A at 24VDC
  Overvoltage, overload and thermal protection
  Power fail and remote inhibit
  Remote sensing
  Safety ground leakage current is less than 0.5mA at 50Hz to 60Hz and 264VAC input
  Single wire current sharing
  Two supervisory outputs 5V and 12V

Certifications

• BABT
  BABT: EN60950/BS7002
  CB certified
  CISPR 22 Class B conducted and radiated
  CSA 22.2-234 level 5
  CSA certified
  EMC compliance to FCC Class B conducted and radiated
  EN55022 Class B conducted and radiated
  IEC EN6100-3-2 (Active power factor correction)
  NEMKO certified
  NEMKO: EN 60950/EMKO-TUE (74 sec) 203
  UL approved
  UL1950
  VDE: 0805/EN60950 (IEC950)

Approvals

VDE; UL Recognised; CSA Certified; NEMKO; BABT