Teknik Belgeler
Özellikler
Marka
AssemtechÜrün Tipi
Reed Switch
Kontak Yapılandırması
SPST
Maksimum Anahtarlama Akımı
0.5A
Maksimum Anahtarlama Gücü
6VA
Maksimum Anahtarlama Gerilimi
140V
Kontak Direnci
150mΩ
Kontak Malzemesi
Rhodium
Maksimum Serbest Bırakma Süresi
0.05ms
Çalışma Süresi (Sekme Dahil)
0.3ms
AT Değer Aralığı
30 to 40 AT
Terminal Tipi
Tel
Montaj Tipi
PCB Montajı
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
125°C
Uzunluk
11mm
Standartlar/Onaylar
ISO
Seri
GC
Menşe
Netherlands
Ürün Ayrıntıları
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
AssemtechÜrün Tipi
Reed Switch
Kontak Yapılandırması
SPST
Maksimum Anahtarlama Akımı
0.5A
Maksimum Anahtarlama Gücü
6VA
Maksimum Anahtarlama Gerilimi
140V
Kontak Direnci
150mΩ
Kontak Malzemesi
Rhodium
Maksimum Serbest Bırakma Süresi
0.05ms
Çalışma Süresi (Sekme Dahil)
0.3ms
AT Değer Aralığı
30 to 40 AT
Terminal Tipi
Tel
Montaj Tipi
PCB Montajı
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
125°C
Uzunluk
11mm
Standartlar/Onaylar
ISO
Seri
GC
Menşe
Netherlands
Ürün Ayrıntıları
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.