Bartec ComEx Serisi Ø 30,5mm Buton (Sadece Kafa Parçası), Yeşil, Kırmızı, Beyaz, Sarı
Teknik Belgeler
Özellikler
Marka
BartecÜrün Tipi
Buton Başlığı
Seri
ComEx
Kesici Çapı
30mm
Basmalı Düğme Aktüasyonu
Anlık
Basmalı Düğme Stili
Yuvarlak
Basmalı Düğme Malzemesi
Thermoplastic
Basmalı Düğme Çapı
30mm
Standartlar/Onaylar
No
Tehlikeli Alan Sertifikası
NO
Menşe
Germany
Ürün Ayrıntıları
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Stok bilgileri geçici olarak kullanılamıyor.
1.131,90 TL
1.131,90 TL Each (KDV Hariç)
1.358,28 TL
1.358,28 TL Each KDV Dahil
1
1.131,90 TL
1.131,90 TL Each (KDV Hariç)
1.358,28 TL
1.358,28 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
BartecÜrün Tipi
Buton Başlığı
Seri
ComEx
Kesici Çapı
30mm
Basmalı Düğme Aktüasyonu
Anlık
Basmalı Düğme Stili
Yuvarlak
Basmalı Düğme Malzemesi
Thermoplastic
Basmalı Düğme Çapı
30mm
Standartlar/Onaylar
No
Tehlikeli Alan Sertifikası
NO
Menşe
Germany
Ürün Ayrıntıları
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.