Bartec Seçici Buton (Sadece Kafa Parçası), Standart Siyah Seçici Mandal, 3 Konumlu, Latching Operatörlü
Teknik Belgeler
Özellikler
Marka
BartecAktüatör Rengi
Siyah
Aydınlatmalı
No
Konumların Sayısı
3
Aktüatör Tipi
Standart Kol
Anahtar Aktüasyonu
Mandallama
Seri
Bartec
Tehlikeli Alan Sertifikası
ATEX
Fırlatma Açısı
90Derece
Menşe
Germany
Ürün Ayrıntıları
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Stok bilgileri geçici olarak kullanılamıyor.
2.154,70 TL
2.154,70 TL Each (KDV Hariç)
2.585,64 TL
2.585,64 TL Each KDV Dahil
1
2.154,70 TL
2.154,70 TL Each (KDV Hariç)
2.585,64 TL
2.585,64 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 2.154,70 TL |
| 5 - 9 | 2.090,90 TL |
| 10+ | 2.001,58 TL |
Teknik Belgeler
Özellikler
Marka
BartecAktüatör Rengi
Siyah
Aydınlatmalı
No
Konumların Sayısı
3
Aktüatör Tipi
Standart Kol
Anahtar Aktüasyonu
Mandallama
Seri
Bartec
Tehlikeli Alan Sertifikası
ATEX
Fırlatma Açısı
90Derece
Menşe
Germany
Ürün Ayrıntıları
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.