Bartec Anahtarlı Buton (Sadece Kafa), Anahtar, 2 Konumlu, Latching Operatörlü
Teknik Belgeler
Özellikler
Marka
BartecSeri
Bartec
Ürün Tipi
Anahtarlı Buton (Sadece Kafa)
Konumların Sayısı
2
Anahtar Kullanımı
Mandallama
Fırlatma Açısı
90 °
Anahtarların Sayısı
2
Tehlikeli Alan Sertifikası
ATEX
Standartlar/Onaylar
No
Menşe
Germany
Ürün Ayrıntıları
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Stok bilgileri geçici olarak kullanılamıyor.
6.174,08 TL
6.174,08 TL Each (KDV Hariç)
7.408,90 TL
7.408,90 TL Each KDV Dahil
1
6.174,08 TL
6.174,08 TL Each (KDV Hariç)
7.408,90 TL
7.408,90 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 6.174,08 TL |
| 5 - 9 | 5.984,36 TL |
| 10+ | 5.733,26 TL |
Teknik Belgeler
Özellikler
Marka
BartecSeri
Bartec
Ürün Tipi
Anahtarlı Buton (Sadece Kafa)
Konumların Sayısı
2
Anahtar Kullanımı
Mandallama
Fırlatma Açısı
90 °
Anahtarların Sayısı
2
Tehlikeli Alan Sertifikası
ATEX
Standartlar/Onaylar
No
Menşe
Germany
Ürün Ayrıntıları
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.