
Teknik Belgeler
Özellikler
Marka
DuracellÜrün Tipi
Düğme Pil
Şarj Edilen Pil Boyutları
PR70
Kimya
Zinc Air
Nominal Gerilim
1.4V
Pil Kapasitesi
95mAh
Çap
5.8 mm
Pillerin Sayısı
6
Sonlandırma Tipi
Düz
Yükseklik
3.6mm
Ağırlık
300mg
Standartlar/Onaylar
ANSI, IEC
IEC Kodu
PR70
Seri
Duracell EasyTab
Ürün Ayrıntıları
This button battery supplies low-voltage power for Compact electronic devices using zinc-air chemistry. It operates within typical ambient temperatures for consumer use and is designed for applications requiring a stable 1.4V nominal output and flat termination contacts. The pack contains six cells and meets recognised ANSI and IEC standards for this size and chemistry.
Delivered capacity varies with applied load, temperature and cut-off voltage and is specified as 95mAh measured to 1.1V at a defined test condition.
The typical internal impedance is 16ohm at 1kHz which influences voltage stability during discharge and suitability for low-drain loads.
The cell measures 5.8mm diameter and 3.6mm height, with flat terminals for contact surfaces.
The recommended ambient range for operation is 0°C to 50°C.
The pack contains six batteries.
Keep button batteries out of the reach of children. Consult a doctor immediately if ingested.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Pack of 6) (KDV Hariç)
6
Teklif İsteyiniz
Each (In a Pack of 6) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
6
Teknik Belgeler
Özellikler
Marka
DuracellÜrün Tipi
Düğme Pil
Şarj Edilen Pil Boyutları
PR70
Kimya
Zinc Air
Nominal Gerilim
1.4V
Pil Kapasitesi
95mAh
Çap
5.8 mm
Pillerin Sayısı
6
Sonlandırma Tipi
Düz
Yükseklik
3.6mm
Ağırlık
300mg
Standartlar/Onaylar
ANSI, IEC
IEC Kodu
PR70
Seri
Duracell EasyTab
Ürün Ayrıntıları
This button battery supplies low-voltage power for Compact electronic devices using zinc-air chemistry. It operates within typical ambient temperatures for consumer use and is designed for applications requiring a stable 1.4V nominal output and flat termination contacts. The pack contains six cells and meets recognised ANSI and IEC standards for this size and chemistry.
Delivered capacity varies with applied load, temperature and cut-off voltage and is specified as 95mAh measured to 1.1V at a defined test condition.
The typical internal impedance is 16ohm at 1kHz which influences voltage stability during discharge and suitability for low-drain loads.
The cell measures 5.8mm diameter and 3.6mm height, with flat terminals for contact surfaces.
The recommended ambient range for operation is 0°C to 50°C.
The pack contains six batteries.
Keep button batteries out of the reach of children. Consult a doctor immediately if ingested.