
Teknik Belgeler
Özellikler
Marka
HartingÜrün Tipi
Menteşeli Çerçeve
Aksesuar Tipi
Metal Frame
Boyut
16B
Kablo Giriş Açısı
Üst
Renk
Gri
Kontakların Sayısı
2
Seri
Han Modular
Şununla Birlikte Kullanım İçin
Standard Han Hoods and Housings
Malzeme
Basınçlı Çinko Döküm
Standartlar/Onaylar
CSA, DNV GL, UL
Diş Boyutu
M3
Minimum Tel Boyutu (mm²)
4mm²
Maksimum Tel Boyutu (mm²)
10mm²
Menşe
Germany
Ürün Ayrıntıları
This hinged frame provides a metal mounting solution for four-module connector assemblies in industrial environments. Designed for TOP cable entry and compatible with standard Han hoods and housings, it offers a Compact Interface for modular connector configurations. The die-cast zinc construction and grey finish suit heavy-duty applications where robust mechanical support and predictable mating performance are required.
The accessory accepts PE conductor cross-sections from 4mm² up to 10mm².
The frame is rated to operate between -40°C and +125°C.
It holds approvals from CSA, DNV GL and UL for connector accessories.
Conductors should be stripped to a length of 8mm to 10mm.
Use a slotted 0.6 x 3.5mm or a PH2 screwdriver for the fastening screws.
The 1 module is for use with hoods and housings from range 2 – the Harting 10A Series (see stock no. 181-0662 which is typical of that range)
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1

Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1

Teknik Belgeler
Özellikler
Marka
HartingÜrün Tipi
Menteşeli Çerçeve
Aksesuar Tipi
Metal Frame
Boyut
16B
Kablo Giriş Açısı
Üst
Renk
Gri
Kontakların Sayısı
2
Seri
Han Modular
Şununla Birlikte Kullanım İçin
Standard Han Hoods and Housings
Malzeme
Basınçlı Çinko Döküm
Standartlar/Onaylar
CSA, DNV GL, UL
Diş Boyutu
M3
Minimum Tel Boyutu (mm²)
4mm²
Maksimum Tel Boyutu (mm²)
10mm²
Menşe
Germany
Ürün Ayrıntıları
This hinged frame provides a metal mounting solution for four-module connector assemblies in industrial environments. Designed for TOP cable entry and compatible with standard Han hoods and housings, it offers a Compact Interface for modular connector configurations. The die-cast zinc construction and grey finish suit heavy-duty applications where robust mechanical support and predictable mating performance are required.
The accessory accepts PE conductor cross-sections from 4mm² up to 10mm².
The frame is rated to operate between -40°C and +125°C.
It holds approvals from CSA, DNV GL and UL for connector accessories.
Conductors should be stripped to a length of 8mm to 10mm.
Use a slotted 0.6 x 3.5mm or a PH2 screwdriver for the fastening screws.
The 1 module is for use with hoods and housings from range 2 – the Harting 10A Series (see stock no. 181-0662 which is typical of that range)