
Teknik Belgeler
Özellikler
Ürün Tipi
Fiber Optik Kablo
Kablo Uzunluğu
2m
Çekirdek Çapı
3mm
Çekirdek Sayısı
2
Kılıf Rengi
Sarı
Minimum Çalışma Sıcaklığı
-20°C
Fiber Tipi
OS2
Alt Tip
Kablo
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
IEC 61754, IEC 60793-2-10:2011 (OM3 and OM4), IEC 60793-2-50:2012 (OS2), IEC 60332-1
Menşe
China
Ürün Ayrıntıları
This fibre optic cable provides a single‑mode connection for short interconnects within structured networks and industrial environments. Finished in a yellow outer sheath, it contains two OS2 optical cores within a 3mm diameter construction and is supplied at a 2m length. The cable is intended for low‑loss transmission where a single‑mode fibre is required and is suitable for installations that must meet recognised IEC optical interface and safety standards.
Optical interface and attenuation requirements are covered by IEC 60793‑2‑50 for OS2, with connector interface compatibility referenced in IEC 61754.
The outer jacket complies with IEC 60332‑1 flame propagation criteria for single‑cable vertical flame tests.
The cable is specified for reliable function between -20°C and 60°C, suited to many controlled indoor and some harsh ambient environments.
Yes, its OS2 single‑mode construction and two‑core configuration make it suitable as a 2m patch jumper for low‑loss duplex connections.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Ürün Tipi
Fiber Optik Kablo
Kablo Uzunluğu
2m
Çekirdek Çapı
3mm
Çekirdek Sayısı
2
Kılıf Rengi
Sarı
Minimum Çalışma Sıcaklığı
-20°C
Fiber Tipi
OS2
Alt Tip
Kablo
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
IEC 61754, IEC 60793-2-10:2011 (OM3 and OM4), IEC 60793-2-50:2012 (OS2), IEC 60332-1
Menşe
China
Ürün Ayrıntıları
This fibre optic cable provides a single‑mode connection for short interconnects within structured networks and industrial environments. Finished in a yellow outer sheath, it contains two OS2 optical cores within a 3mm diameter construction and is supplied at a 2m length. The cable is intended for low‑loss transmission where a single‑mode fibre is required and is suitable for installations that must meet recognised IEC optical interface and safety standards.
Optical interface and attenuation requirements are covered by IEC 60793‑2‑50 for OS2, with connector interface compatibility referenced in IEC 61754.
The outer jacket complies with IEC 60332‑1 flame propagation criteria for single‑cable vertical flame tests.
The cable is specified for reliable function between -20°C and 60°C, suited to many controlled indoor and some harsh ambient environments.
Yes, its OS2 single‑mode construction and two‑core configuration make it suitable as a 2m patch jumper for low‑loss duplex connections.