Teknik Belgeler
Özellikler
Marka
HellermannTytonRenk
Siyah
Kablo Bağı Genişliği Kabulü
4.1mm
Uzunluk
19mm
Genişlik
19 mm
Sabitleme Deliği Çapı
3.1mm
Kendinden Yapışkanlı
Yes
Malzeme
Naylon 66
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Miktar
100
Ürün Ayrıntıları
Make mounting bundled cables a piece of cake with this cable tie mount from HellermannTyton. Simply thread your chosen cable tie through two of the unit's four entry points and tighten it around your bunch of wires. The mount's sticky back lets you secure the bundle to a flat surface like a wall or floor. You can trust it to stay put once stuck in place as its high-strength rubber adhesive is peel-resistant.
As it's made of hardwearing PA66, you can trust this mount to stand up to impacts and abrasion and to tolerate a broad ambient temperature range between -40°C and +85°C without risk of failure.
HellermannTyton self-adhesive cable tie mounts that provide a fast and simple way of securing cable ties. MB series mounting bases allow ties to be inserted from all 4 sides. Ideal for cable management for use in control cabinets, telecoms equipment or domestic appliances where the use of holes, screws or nuts and bolts is impractical or undesirable.
The range includes the following cable tie mounts with various cable tie width acceptance, lengths x widths (mm) and colours:
131-0242 - Black 13 x 13
131-0243 - Black 19 x 19
131-0244 - White 19 x 19
131-0245 - Black 28 x 28
131-0246 - White 28 x 28
131-0247 - Black 38 x 38
131-0250 - Black 19 x 19
131-0251 - Black 28 x 28
131-0252 - Black 38 x 38
190-3326 – Natural 28 x 28
190-3354 - White 37.7 x 37.7
219-875 - Black 19 x 19
359-2063 - Natural 19 x 19
385-3885 - Natural 13 x 13
600-931 - Natural 19 x 19
Typical Applications
These cable tie mounts are suitable for the following markets and industries:
Rail Transportation
Electronics Industry
Aerospace Industry
Shipbuilding
Defence Industry
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
HellermannTytonRenk
Siyah
Kablo Bağı Genişliği Kabulü
4.1mm
Uzunluk
19mm
Genişlik
19 mm
Sabitleme Deliği Çapı
3.1mm
Kendinden Yapışkanlı
Yes
Malzeme
Naylon 66
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Miktar
100
Ürün Ayrıntıları
Make mounting bundled cables a piece of cake with this cable tie mount from HellermannTyton. Simply thread your chosen cable tie through two of the unit's four entry points and tighten it around your bunch of wires. The mount's sticky back lets you secure the bundle to a flat surface like a wall or floor. You can trust it to stay put once stuck in place as its high-strength rubber adhesive is peel-resistant.
As it's made of hardwearing PA66, you can trust this mount to stand up to impacts and abrasion and to tolerate a broad ambient temperature range between -40°C and +85°C without risk of failure.
HellermannTyton self-adhesive cable tie mounts that provide a fast and simple way of securing cable ties. MB series mounting bases allow ties to be inserted from all 4 sides. Ideal for cable management for use in control cabinets, telecoms equipment or domestic appliances where the use of holes, screws or nuts and bolts is impractical or undesirable.
The range includes the following cable tie mounts with various cable tie width acceptance, lengths x widths (mm) and colours:
131-0242 - Black 13 x 13
131-0243 - Black 19 x 19
131-0244 - White 19 x 19
131-0245 - Black 28 x 28
131-0246 - White 28 x 28
131-0247 - Black 38 x 38
131-0250 - Black 19 x 19
131-0251 - Black 28 x 28
131-0252 - Black 38 x 38
190-3326 – Natural 28 x 28
190-3354 - White 37.7 x 37.7
219-875 - Black 19 x 19
359-2063 - Natural 19 x 19
385-3885 - Natural 13 x 13
600-931 - Natural 19 x 19
Typical Applications
These cable tie mounts are suitable for the following markets and industries:
Rail Transportation
Electronics Industry
Aerospace Industry
Shipbuilding
Defence Industry
