Jumo 702034 Panel Mount PID Controller 1 Input, 1 Output Relay 240V ac PID Controller

The Jumo Compact controller is used for 2 state controller and 3 state controller and the control of regulating valve. The universal analogue input for RTD temperature probe, thermocouple or current/voltage signal is freely programmable. The values can be shown in °C or in °F. The binary input can be used, for example, to reduce operation and setting, to activate a ramp or a timer or to start auto tuning. Binary input can be used to reduce operation and setting, activate a ramp or timer, or start auto tuning. There are two relay outputs with a switching capacity of 3 A / 230 V and a binary input. Additionally a special firing curve can be used for small ceramic kilns so there can be a controlled start-up and a time-dependent burning. Setpoint value, gradient and burning time can be entered at the device by the operator. As an alternative to the front side operation, the controller can be programmed by a setup program und USB interface without a additional power supply.

• Switch position of the relays is shown with yellow LEDs
• Each relay can be assigned a different function
• Voltage supply is AC 110 to 240 V
• Controller has a ramp function with adjustable gradients for continuous set point changes
• 7 segment LED displays with one or two decimal place