Teknik Belgeler
Özellikler
Marka
MicrochipKit İçeriği
Flashpro 4 Programmer unit, USB Cable, Flashpro4 10 Pin Ribbon Cable
Çekirdek Mimarisi
FPGA Tabanlı
Kit Tipi
Debugger
Standartlar/Onaylar
CE, ROHS
Ürün Tipi
Programmers & In-Circuit Emulator
Alt Tip
FPGA Programmer/USB Programmer
Şununla Birlikte Kullanım İçin
PROASIC, Microchip/micro-semi IGLOO, Smart Fusion
Ürün Ayrıntıları
The Microchip FlashPro4 is a programmer supporting all FPGAs in the Polar Fire, SmartFusion2, IGLOO2, RTG4, IGLOO, ProASIC3, (including RT ProASIC3), Smart Fusion and Fusion families. FlashPro4 offers extremely high performance through the use of USB 2.0 and is high-speed compliant for full use of the 480 Mbps bandwidth. Powered exclusively via USB, FlashPro4 provides a VPUMP voltage of 3.3 V for programming these devices. Multiple FlashPro4 programmers can be connected to a single PC using USB hubs, enabling the end user to set up a small-scale production environment with concurrent ISP occurring across multiple boards and the FlashPro software.
Stok bilgileri geçici olarak kullanılamıyor.
7.262,99 TL
7.262,99 TL Each (KDV Hariç)
8.715,59 TL
8.715,59 TL Each KDV Dahil
1
7.262,99 TL
7.262,99 TL Each (KDV Hariç)
8.715,59 TL
8.715,59 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
MicrochipKit İçeriği
Flashpro 4 Programmer unit, USB Cable, Flashpro4 10 Pin Ribbon Cable
Çekirdek Mimarisi
FPGA Tabanlı
Kit Tipi
Debugger
Standartlar/Onaylar
CE, ROHS
Ürün Tipi
Programmers & In-Circuit Emulator
Alt Tip
FPGA Programmer/USB Programmer
Şununla Birlikte Kullanım İçin
PROASIC, Microchip/micro-semi IGLOO, Smart Fusion
Ürün Ayrıntıları
The Microchip FlashPro4 is a programmer supporting all FPGAs in the Polar Fire, SmartFusion2, IGLOO2, RTG4, IGLOO, ProASIC3, (including RT ProASIC3), Smart Fusion and Fusion families. FlashPro4 offers extremely high performance through the use of USB 2.0 and is high-speed compliant for full use of the 480 Mbps bandwidth. Powered exclusively via USB, FlashPro4 provides a VPUMP voltage of 3.3 V for programming these devices. Multiple FlashPro4 programmers can be connected to a single PC using USB hubs, enabling the end user to set up a small-scale production environment with concurrent ISP occurring across multiple boards and the FlashPro software.
