Teknik Belgeler
Özellikler
Marka
NorgrenÜrün Tipi
Pnömatik Bağlantı Elemanı
Bağlantı Boyutu A
Push In 12 mm
Bağlantı Boyutu B
Push In 10 mm
Seri
Pneufit C
Boru Bağlantısı Tipi
İterek Sokma
Boru Bağlantısı Boyutu
12.10mm
Malzeme
Polibütilen
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
No
Bitirme
Nikel Kaplamalı
Maksimum Çalışma Basıncı
10 bar
Menşe
Korea, Republic Of
Ürün Ayrıntıları
Missing a link in your compressed air system? Pick up this pneumatic fitting from IMI Norgren to achieve a better-connected infrastructure. It's a versatile option, thanks to a broad operating pressure range from -0.9 to 10 bar. As it's made from PBT, you can depend on it to resist common industrial chemicals, oils and fluids, to deliver effective long-term performance. Nickel-plated brass threading cuts out the risk of corrosion contaminating your supply. This component's push-in ends mean installation takes just two ticks and there's no need for specialist tools.
Yes. This item operates in a temperature range of 0°C to +60°C, so it's suitable for use in difficult industrial settings.
Connector A is 12mm and connector B is 10mm in size. These industry-standard measurements boost compatibility with your pneumatic system.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
NorgrenÜrün Tipi
Pnömatik Bağlantı Elemanı
Bağlantı Boyutu A
Push In 12 mm
Bağlantı Boyutu B
Push In 10 mm
Seri
Pneufit C
Boru Bağlantısı Tipi
İterek Sokma
Boru Bağlantısı Boyutu
12.10mm
Malzeme
Polibütilen
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
No
Bitirme
Nikel Kaplamalı
Maksimum Çalışma Basıncı
10 bar
Menşe
Korea, Republic Of
Ürün Ayrıntıları
Missing a link in your compressed air system? Pick up this pneumatic fitting from IMI Norgren to achieve a better-connected infrastructure. It's a versatile option, thanks to a broad operating pressure range from -0.9 to 10 bar. As it's made from PBT, you can depend on it to resist common industrial chemicals, oils and fluids, to deliver effective long-term performance. Nickel-plated brass threading cuts out the risk of corrosion contaminating your supply. This component's push-in ends mean installation takes just two ticks and there's no need for specialist tools.
Yes. This item operates in a temperature range of 0°C to +60°C, so it's suitable for use in difficult industrial settings.
Connector A is 12mm and connector B is 10mm in size. These industry-standard measurements boost compatibility with your pneumatic system.
