Omron Solid State Röle (SSR) 0,6 A SPNO, PCB'ye Monte, MOSFET, Max Yük Gerilimi: 264 V ac

Omron G3DZ-2R6PL-DC5 MOFSET PCB Mount Power Solid State Relay.

The G3DZ solid State relay is the same size as the G6D with a 0.6 A maximum AC/DC current.;• Switching 0.6 A at 240 V ac or 100 V dc.
• 10μA maximum current leakage (between open terminals).
• With an input resistor
• Overvoltage absorption circuit (AC/DC models only).
• Full and half wave rectified. AC current switchable.
• PCB Mount
• MOSFET
• With input resistance.
• Standard models available with UL and CSA certification.
• RoHS Compliant.

Features and Benefits of the MOSFET PCB Mount Solid State Relay.

• Isolation Photo-voltage coupler.
• No zero cross function.
• No indicators.
• Rated output load 0.6 A, 5 to 240 v ac, 5 to 100 V dc.
• Rated input voltage 5 V dc
• Operating voltage 4 to 6 V dc
• Must release voltage 1 V dc min.
• Impedance 830 Ω +20%
• Must operate voltage 4 V dc maximum.
• Rated load voltage 5 to 240 V ac, 5 to 100 V dc.
• Load voltage range 3 to 264 V ac, 3 to 125 V dc.
• Load current AC = 100 μ to 0.6 A, DC = 10 μ to 0.6 A.
• Inrush current 6 A (10 ms).

G3DZ-2R6PL-DC5 MOFSET PCB Mount Solid State Relay Added Features.

• Operate time 6 ms max.
• Release time 10 ms max.
• Output ON-resistance 2.4 Ω max.
• OFF State leakage 10 μ max (125 V dc), 100 μ max (200 V ac).
• Vibration resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude).
• Shock resistance 1000 m/s².
• Weight 3.1 g approx.

Safety Notes.

• Do not clean or solder the PCB when the Solid State Relay is in the socket.
• Reverse surge voltage – If this is put on the input terminals insert a diode parallel to the input terminal. DO NOT impose a reversed voltage of more than 3 V.
• Terminal material has a high heat induction so any automatic or manual soldering should be achieved with 10 seconds at 260°C.
• Always when fitting a socket ensure it is matched correctly and insert pushing vertically (pressure straight down).

Suitable Isolation Socket.

• Part number P6D-04P. Stock number 376717.

G3DZ SSR

These PCB mount MOSFET power relays have a maximum switching current of 0.6A and are suitable for switching full and half wave alternating currents.

• SSR identical in size to the G6D series (stk no 512-9320 etc) with a max. ac/dc switching current of 0.6A
• Suitable for switching full and half-wave alternating current
• 10μA maximum output leakage current
• Output ON resistance: 2.4Ω
• 2500Vac dielectric strength between input and output
• Input resistor and varistor incorporated
• Single Phase connection line to neutral
• See stk no 376-717 for a suitable PCB socket
• Operating temperature range -30 to +85°C