Teknik Belgeler
Özellikler
Marka
OmronMaksimum Yük Akımı
9A
Ürün Tipi
Katı Hal Rölesi
Montaj Tipi
Yüzey
Maksimum Yük Gerilimi
30V
Seri
G3VM
Terminal Tipi
Yüzeye Monte
Kontak Yapılandırması
SPST
İletken Durum Direnci
0.02Ω
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
UL Recognised
Kapasitans
70pF
Kapalı Durumda Kaçak Akımı
10nA
Menşe
Japan
Ürün Ayrıntıları
The Omron MOSFET relays in SOP 6-pin packages that achieve the low ON resistance and high switching capacitance of a mechanical relay. These MOSFET relays offer great I/O isolation due to its operational principle. It turns the voltage into the light and transfers by the light signal, Therefore input and output are isolated. The standard models offer 2,500 Vrms between input and output. Superior 5,000 VAC products are also available. 3,750 VAC products have also been added to the SOP package series. As MOSFET Relays do not have mechanical contacts, by using a MOSFET instead of an electromechanical relay, it is possible to eliminate switching noise in your applications. Comparing with the triac, MOS FET greatly reduces the dead zone. The input waveform of micro analog signal does not suffer distortion as it does with a triac and is basically converted into output waveform without distortion.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Üretime Uygun Paketleme (Şerit)
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
Üretime Uygun Paketleme (Şerit)
1
Teknik Belgeler
Özellikler
Marka
OmronMaksimum Yük Akımı
9A
Ürün Tipi
Katı Hal Rölesi
Montaj Tipi
Yüzey
Maksimum Yük Gerilimi
30V
Seri
G3VM
Terminal Tipi
Yüzeye Monte
Kontak Yapılandırması
SPST
İletken Durum Direnci
0.02Ω
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
UL Recognised
Kapasitans
70pF
Kapalı Durumda Kaçak Akımı
10nA
Menşe
Japan
Ürün Ayrıntıları
The Omron MOSFET relays in SOP 6-pin packages that achieve the low ON resistance and high switching capacitance of a mechanical relay. These MOSFET relays offer great I/O isolation due to its operational principle. It turns the voltage into the light and transfers by the light signal, Therefore input and output are isolated. The standard models offer 2,500 Vrms between input and output. Superior 5,000 VAC products are also available. 3,750 VAC products have also been added to the SOP package series. As MOSFET Relays do not have mechanical contacts, by using a MOSFET instead of an electromechanical relay, it is possible to eliminate switching noise in your applications. Comparing with the triac, MOS FET greatly reduces the dead zone. The input waveform of micro analog signal does not suffer distortion as it does with a triac and is basically converted into output waveform without distortion.