Pico PicoConnect 441 Osiloskop Probu, 15MHz, Prob Tipi: Diferansiyel
Teknik Belgeler
Özellikler
Marka
pico TechnologyÜrün Tipi
Osiloskop Probu
Prob Tipi
Differential
Zayıflatma
1:1
Bant Genişliği
15MHz
Maksimum Ortak Mod Giriş Gerilimi
50V
Konnektör Tipi
D9
Model Numarası
441
Probların Sayısı
1
Güvenlik Kategorisi Seviyesi
CAT III
Güvenlik Kategorisi Gerilimi
1000V
Seri
PicoConnect
Standartlar/Onaylar
EN 61010-1:2010
Ürün Ayrıntıları
PicoConnect 441 1:1 Differential Probe
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.
Pico PC Based Instruments
Stok bilgileri geçici olarak kullanılamıyor.
2.734,94 TL
2.734,94 TL Each (KDV Hariç)
3.281,93 TL
3.281,93 TL Each KDV Dahil
1
2.734,94 TL
2.734,94 TL Each (KDV Hariç)
3.281,93 TL
3.281,93 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
pico TechnologyÜrün Tipi
Osiloskop Probu
Prob Tipi
Differential
Zayıflatma
1:1
Bant Genişliği
15MHz
Maksimum Ortak Mod Giriş Gerilimi
50V
Konnektör Tipi
D9
Model Numarası
441
Probların Sayısı
1
Güvenlik Kategorisi Seviyesi
CAT III
Güvenlik Kategorisi Gerilimi
1000V
Seri
PicoConnect
Standartlar/Onaylar
EN 61010-1:2010
Ürün Ayrıntıları
PicoConnect 441 1:1 Differential Probe
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.