Pico PicoConnect 442 Osiloskop Probu, 10MHz, Prob Tipi: Diferansiyel, 1kV
Teknik Belgeler
Özellikler
Marka
pico TechnologyÜrün Tipi
Osiloskop Probu
Prob Tipi
Diferansiyel
Zayıflatma
1:25
Bant Genişliği
10MHz
Maksimum Ortak Mod Giriş Gerilimi
1kV
Konnektör Tipi
D9
Model Numarası
442
Probların Sayısı
1
Güvenlik Kategorisi Seviyesi
CAT III
Güvenlik Kategorisi Gerilimi
1000V
Seri
PicoConnect
Standartlar/Onaylar
RoHS, EN 61010‑031:2015, WEEE, EN 610101:2010, EN 610102030:2010
Ürün Ayrıntıları
PicoConnect 442 25:1 Differential Probe (1000 V CAT III)
The PicoConnect 442 probe is a 25:1 attenuating probe that enables the PicoScope 4444 differential oscilloscope to measure large-amplitude voltages up to ±1000 V, or voltages with a large common-mode offset. Such voltages are found in electrical power converters, inverters, motor speed controls, switch mode power supplies and many other devices.
The probe is fitted with the Pico D9 connector for use exclusively with the PicoScope 4444 differential oscilloscope, upon connection it is automatically identified by the scope as a 25:1 probe, and scales the vertical axis in PicoScope 6 software with the correct probe attenuation.
The probe body provides double-insulated protection for the user for CAT ratings up to and including 1000 V CAT III.
The PicoConnect 442 probe is designed and tested to EN 61010-1:2010 General requirements and to EN 61010-2-030:2010 Particular requirements for testing and measuring circuits. The TA089 and TA090 sprung hooks are designed to EN 61010‑031:2015 Safety requirements for hand-held probe assemblies.
Pico PC Based Instruments
Stok bilgileri geçici olarak kullanılamıyor.
10.396,90 TL
10.396,90 TL Each (KDV Hariç)
12.476,28 TL
12.476,28 TL Each KDV Dahil
1
10.396,90 TL
10.396,90 TL Each (KDV Hariç)
12.476,28 TL
12.476,28 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
pico TechnologyÜrün Tipi
Osiloskop Probu
Prob Tipi
Diferansiyel
Zayıflatma
1:25
Bant Genişliği
10MHz
Maksimum Ortak Mod Giriş Gerilimi
1kV
Konnektör Tipi
D9
Model Numarası
442
Probların Sayısı
1
Güvenlik Kategorisi Seviyesi
CAT III
Güvenlik Kategorisi Gerilimi
1000V
Seri
PicoConnect
Standartlar/Onaylar
RoHS, EN 61010‑031:2015, WEEE, EN 610101:2010, EN 610102030:2010
Ürün Ayrıntıları
PicoConnect 442 25:1 Differential Probe (1000 V CAT III)
The PicoConnect 442 probe is a 25:1 attenuating probe that enables the PicoScope 4444 differential oscilloscope to measure large-amplitude voltages up to ±1000 V, or voltages with a large common-mode offset. Such voltages are found in electrical power converters, inverters, motor speed controls, switch mode power supplies and many other devices.
The probe is fitted with the Pico D9 connector for use exclusively with the PicoScope 4444 differential oscilloscope, upon connection it is automatically identified by the scope as a 25:1 probe, and scales the vertical axis in PicoScope 6 software with the correct probe attenuation.
The probe body provides double-insulated protection for the user for CAT ratings up to and including 1000 V CAT III.
The PicoConnect 442 probe is designed and tested to EN 61010-1:2010 General requirements and to EN 61010-2-030:2010 Particular requirements for testing and measuring circuits. The TA089 and TA090 sprung hooks are designed to EN 61010‑031:2015 Safety requirements for hand-held probe assemblies.