P.M.A KS92 AÇIK/KAPALI PID Sıcaklık Kontrol Cihazı, 4 Çıkışlı, Röle, 18 → 30 V dc, 24 V ac
Teknik Belgeler
Özellikler
Marka
P.M.AÇıkış Tipi
Röle
Ürün Tipi
PID Temperature Controller
Çıkışların Sayısı
4
Maksimum Çalışma Sıcaklığı
60°C
Minimum Çalışma Sıcaklığı
0°C
Kontrol Tipi
Açık-Kapalı
Maksimum Besleme Gerilimi
260V
Yalıtımsız Yardımcı Güç Kaynağı
22 mA, 18 V
Digital Comms
PROFIBUS-DP Interface, RS422/RS485/Modbus RTU
Diagnostics
Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm
Maksimum Gerilim
250V
Ekran Tipi
LED, Multi Line
IP Değeri
IP65, IP20, IP00
Standartlar/Onaylar
EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)
Genişlik
48mm
Uzunluk
118mm
Seri
KS92
Montaj Tipi
Panel Kutusu
Giriş Tipi
Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input
Panel Derinliği
118mm
Menşe
United Kingdom
Ürün Ayrıntıları
PMA KS 92-1 Temperature Controller
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
PMA Temperature Controllers
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
P.M.AÇıkış Tipi
Röle
Ürün Tipi
PID Temperature Controller
Çıkışların Sayısı
4
Maksimum Çalışma Sıcaklığı
60°C
Minimum Çalışma Sıcaklığı
0°C
Kontrol Tipi
Açık-Kapalı
Maksimum Besleme Gerilimi
260V
Yalıtımsız Yardımcı Güç Kaynağı
22 mA, 18 V
Digital Comms
PROFIBUS-DP Interface, RS422/RS485/Modbus RTU
Diagnostics
Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm
Maksimum Gerilim
250V
Ekran Tipi
LED, Multi Line
IP Değeri
IP65, IP20, IP00
Standartlar/Onaylar
EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)
Genişlik
48mm
Uzunluk
118mm
Seri
KS92
Montaj Tipi
Panel Kutusu
Giriş Tipi
Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input
Panel Derinliği
118mm
Menşe
United Kingdom
Ürün Ayrıntıları
PMA KS 92-1 Temperature Controller
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.