Teknik Belgeler
Özellikler
Marka
PR ElectronicsKanalların Sayısı
1
Ürün Tipi
Galvanic Barrier
Barrier Type
Galvanic Barrier
Montaj Tipi
DIN Rayı
Tehlikeli Alan Sertifikası
ATEX
Terminal Tipi
Vida
IP Değeri
IP20
Besleme Gerilimi
19.2 to 300 V dc, 21.6 to 253 V ac
Maximum Safety Current
400mA
Minimum Çalışma Sıcaklığı
-20°C
Maximum Safety Voltage
250V ac
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
NE 21, NE 43, IEC 61508
Seri
5100
Menşe
Denmark
Ürün Ayrıntıları
PR Electronics 5104B Ex Repeater / Power Supply
PR Electronics 5104B intrinsically safe repeater is a power supply and safety barrier for 2-wire transmitters mounted in a hazardous area. The 5104B signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics - Ex Interfaces
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
PR ElectronicsKanalların Sayısı
1
Ürün Tipi
Galvanic Barrier
Barrier Type
Galvanic Barrier
Montaj Tipi
DIN Rayı
Tehlikeli Alan Sertifikası
ATEX
Terminal Tipi
Vida
IP Değeri
IP20
Besleme Gerilimi
19.2 to 300 V dc, 21.6 to 253 V ac
Maximum Safety Current
400mA
Minimum Çalışma Sıcaklığı
-20°C
Maximum Safety Voltage
250V ac
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
NE 21, NE 43, IEC 61508
Seri
5100
Menşe
Denmark
Ürün Ayrıntıları
PR Electronics 5104B Ex Repeater / Power Supply
PR Electronics 5104B intrinsically safe repeater is a power supply and safety barrier for 2-wire transmitters mounted in a hazardous area. The 5104B signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.


