Teknik Belgeler
Özellikler
Marka
PR ElectronicsÜrün Tipi
Sıcaklık Vericisi
Giriş Tipi
PT100
Çap
44mm
Minimum Sıcaklık Girişi
-200°C
Maksimum Sıcaklık Girişi
850°C
Seri
5437
Derinlik
20.2mm
Maksimum Besleme Gerilimi
30V
Minimum Çalışma Sıcaklığı
-50°C
Maksimum Çalışma Sıcaklığı
85°C
Tehlikeli Alan Sertifikası
Ex, ATEX
Standartlar/Onaylar
NE 21, NE 43
Menşe
Denmark
Ürün Ayrıntıları
The 5437D can be mounted in zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I, Division 1, Groups A, B, C, D.
PR Electronics 5437 dual input temperature transmitter offers unrivalled performance in the most demanding of applications to convert a wide array of input types to a 4 – 20 mA output signal. The transmitter has 7 input terminals measuring one or two sensors, including two 4-wire RTDs, with individual sensor error detection. Configuring the transmitter with either HART 7 or HART 5 protocols provide flexibility and future proof communication.
The PR 5437 provides unrivalled dual input versatility. Virtually any thermocouple or RTD plus linear resistance up to 100 kΩ, potentiometer, and bipolar mV signals. Input sensor redundancy function maintains process availability and safety by seamlessly switching to backup sensor in the event of primary sensor failure. An alert via HART can be used to allow scheduling of maintenance on the faulty sensor.
Wiring - Innovative housing design means the 5437 temperature transmitter can be wired from either the inside or the outside of the terminals.
1/4 centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.
Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.
Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.
Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
PR ElectronicsÜrün Tipi
Sıcaklık Vericisi
Giriş Tipi
PT100
Çap
44mm
Minimum Sıcaklık Girişi
-200°C
Maksimum Sıcaklık Girişi
850°C
Seri
5437
Derinlik
20.2mm
Maksimum Besleme Gerilimi
30V
Minimum Çalışma Sıcaklığı
-50°C
Maksimum Çalışma Sıcaklığı
85°C
Tehlikeli Alan Sertifikası
Ex, ATEX
Standartlar/Onaylar
NE 21, NE 43
Menşe
Denmark
Ürün Ayrıntıları
The 5437D can be mounted in zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I, Division 1, Groups A, B, C, D.
PR Electronics 5437 dual input temperature transmitter offers unrivalled performance in the most demanding of applications to convert a wide array of input types to a 4 – 20 mA output signal. The transmitter has 7 input terminals measuring one or two sensors, including two 4-wire RTDs, with individual sensor error detection. Configuring the transmitter with either HART 7 or HART 5 protocols provide flexibility and future proof communication.
The PR 5437 provides unrivalled dual input versatility. Virtually any thermocouple or RTD plus linear resistance up to 100 kΩ, potentiometer, and bipolar mV signals. Input sensor redundancy function maintains process availability and safety by seamlessly switching to backup sensor in the event of primary sensor failure. An alert via HART can be used to allow scheduling of maintenance on the faulty sensor.
Wiring - Innovative housing design means the 5437 temperature transmitter can be wired from either the inside or the outside of the terminals.
1/4 centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.
Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.
Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.
Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.
