Pyro Controle STATOP 48 PID Sıcaklık Kontrol Cihazı, Tek Çıkışlı, Röle, 90 → 260 V ac , 48 x 48mm

Pyro Controle Temperature Controller

The Pyro Controle STATOP 30 series temperature controller has a supply voltage rating ranging from 90VAC to 260VAC. This controller has a width of 48mm and a height of 48mm (1/16 DIN)device. It has a single relay output. This device equipped with an automatic action adjustment system with a self-adjusting PID regulation mode. It also includes fuzzy logic that carries out automatic process recovery. The controller is a combination of technical sophistication and user-friendliness and can be used by people with no specific control skills.

Features and Benefits

• Adjustable hysteresis from 0 second to11 seconds
• Communication by RS 485 connection (depending on model)
• Digital regulators fitted with automatic action adjustment system is self-adjusting PID regulation mode
• Display has 2 x 10,000 points
• Operating temperature ranging between -10°C and 50°C
• Programmable temperature input is thermocouple and Pt 100ohm resistance
• Proportional band is 0°C to 20°C
• Regulation algorithm is PID and fuzzy logic
• Regulation output is 2A inverter relay and analogue 4mA to 20 mA and 0V to 10V or logic 0V to 5V
• Regulators fitted with 2 displays are red for measurement and green for setpoint
• Temperature ramp is 0°C/minute to 480°C/minute
• Timer is 0 minutes to 9999 minutes

Certifications

• IP50 rated