RS PRO Cylindrical Inductive Proximity Sensor, M8 x 1 PNP IME08 Standard 30V 1.5 mm 30 V dc 200mA

SICK IME08 Standard Series Proximity Sensor, 1.5mm Maximum Detection, M8x1 Thread Size - 1092904

This proximity sensor detects metallic targets without contact and is designed for industrial automation and control assemblies. It is a compact, cylindrical flush-mount device with a 3-wire cable connection and a normally open PNP switching output. The unit operates from low-voltage DC supplies and is suitable for use where a short sensing distance and robust environmental protection are required.

Features & Benefits

• 1.5mm sensing distance provides precise close-range detection
  4kHz switching frequency enables Rapid state changes for fast processes
  IP67 enclosure rating protects against dust and temporary immersion
  10V to 30V DC supply range allows versatile system integration
  200mA continuous current capacity supports moderate load devices
  Shielded design reduces interference for stable switching behaviour

**Applications**

• Suitable for presence sensing on automated pick-and-place machines
  Ideal for metal detection on conveyor positioning systems
  Used for end-of-travel detection in Compact actuators
  Can be used for proximity feedback on industrial robots
  Used with control panels requiring flush-mounted sensors

What cable and connection arrangement does it use?

It is supplied with a 2m PVC-sheathed cable wired as DC three-wire for straightforward PNP integration.

How does it tolerate electrical faults or miswiring?

The device includes short-circuit, reverse polarity and power-up Pulse protection to limit damage from wiring errors.

What operating temperatures can it withstand?

It will operate within an ambient range of –25°C to +75°C for typical industrial environments.

What mechanical robustness does it offer for vibration-prone installations?

It withstands shock up to 30g and vibration from 10Hz to 55Hz, with 1mm amplitude for continuity under dynamic loads.

Notes

This sensor is flush mounted

Approvals

EN60947-5-2