RS Pro Nikel Kaplamalı Pirinç Pilot Uyarılı Küresel Vana, 1,5 inç BSP

S.64LT Brass Ball Valve - 1/4 Turn, ISO 5211 Actuator Mounting Pad

More and more automation is required at all levels in our society and the S.64 range is the answer to all our needs for reliable actuated ball valves.
It features special seat design to automatically compensate for wear and it has successfully passed 100.000* cycle life tests.

• ISO 5211 actuator mounting pad allow direct mounting of electric and pneumatic actuators, with no bracket or coupling
• required
• Application : Air, Water, Industry
• Operating Temperature : -20ﾟC (-4ﾟF) / +170ﾟC (+350ﾟF)
• Operating pressure : PN40 (600 PSI) up to 2’’, non-shock cold working pressure
• Threads : EN 10226-1, ISO 228 parallel female by female threads
• Port : Full
• Connections options : FxF
• Stem Configuration : Blowout-proof nickel plated brass stem, with two FPM O-rings at the stem for maximum safety
• Ball seats : Reinforced PTFE self-lubricating, with flexible-lip and wear compensation design
• Body : Full port to DIN 3357 for maximum flow
• 100% Made in Italy
• Chrome plated brass ball for longer life with rinse hole
• Silicone-free lubricant on all seals
• 24h 100% seal test guaranteed
• Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts
• No maintenance ever required
• Handle clearly shows ball position
• Quality : Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant; Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications

• EN 10226-1, ISO 228 parallel female by female threads

Thread:

• Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety

Stem:

• Reinforced PTFE self-lubricating seats with flexible-lip and wear compensation design

Seals:

• Shell rating: 40 bar (600PSI) non shock cold working pressure
• Seat rating: Delta P permissible 16 bar (230 PSI)

Working Pressure:

• -20ﾟC (-4ﾟF)
• +170ﾟC (+350ﾟF)

Operating Temperature:

• According to 97/23 CE module A: it cannot be used with dangerous gases in sizes larger than 25mm

PED Directives

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Notes

Approvals apply to specific configurations only

Approvals

WRAS (UK)
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
UkrSepro (Ukraine)
RoHS Compliant

Warning

Freezing of the fluid in the installation may severely damage the valve