RS PRO Osiloskop Probu, 50MHz, Prob Tipi: Diferansiyel, Yüksek Gerilim, 1,5kV
Teknik Belgeler
Özellikler
Marka
RS ProÜrün Tipi
Osiloskop Probu
Prob Tipi
Differential
Bant Genişliği
50MHz
Maksimum Ortak Mod Giriş Gerilimi
1.5kV
Konnektör Tipi
BNC, USB Type B, Socket
Probların Sayısı
1
Güvenlik Kategorisi Seviyesi
CAT III, ARM Cortex, CAT II
Yükselme Süresi
5ns
Standartlar/Onaylar
CE: EN500811 and 500821, IEC 10101
Menşe
China
Ürün Ayrıntıları
RS Pro DC-50 MHz High Voltage Differential Probe RSDPB4080
RS Pro high-voltage differential probes are designed for the measurement of high-voltage differential signal, to meet the demand for floating measurement. The high bandwidth meets the demand for most measurement systems.
The probes are equipped with standard BNC input connectors. They can be used with any manufacturer oscilloscope (oscilloscope input impedance should set to 1 MΩ. When 50 Ω is selected, the attenuation multiply attenuates doubles) to test waveform of the tested circuits. There is an automatic save function, to prevent users reoperating in case of power supply drops. The probes have good capability of common mode noise suppression and can be widely used in the research and development, debugging or overhauling work for switching power supply, frequency converter, electronic ballast, frequency conversion electronic appliances and other electric power equipment.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
RS ProÜrün Tipi
Osiloskop Probu
Prob Tipi
Differential
Bant Genişliği
50MHz
Maksimum Ortak Mod Giriş Gerilimi
1.5kV
Konnektör Tipi
BNC, USB Type B, Socket
Probların Sayısı
1
Güvenlik Kategorisi Seviyesi
CAT III, ARM Cortex, CAT II
Yükselme Süresi
5ns
Standartlar/Onaylar
CE: EN500811 and 500821, IEC 10101
Menşe
China
Ürün Ayrıntıları
RS Pro DC-50 MHz High Voltage Differential Probe RSDPB4080
RS Pro high-voltage differential probes are designed for the measurement of high-voltage differential signal, to meet the demand for floating measurement. The high bandwidth meets the demand for most measurement systems.
The probes are equipped with standard BNC input connectors. They can be used with any manufacturer oscilloscope (oscilloscope input impedance should set to 1 MΩ. When 50 Ω is selected, the attenuation multiply attenuates doubles) to test waveform of the tested circuits. There is an automatic save function, to prevent users reoperating in case of power supply drops. The probes have good capability of common mode noise suppression and can be widely used in the research and development, debugging or overhauling work for switching power supply, frequency converter, electronic ballast, frequency conversion electronic appliances and other electric power equipment.