Teknik Belgeler
Özellikler
Marka
RS ProÜrün Tipi
Pnömatik Bağlantı Elemanı
Alt Tip
Rakor Düz
Bağlantı Tipi A
İterek Sokma
Bağlantı Boyutu A
10 mm
Bağlantı Boyutu B
10 mm
Bağlantı Tipi B
İterek Sokma
Minimum Çalışma Sıcaklığı
0°C
Malzeme
Polioksimetilen
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
No
Gıda sınıfı
Yok
Kimyasal Maddelere Dayanıklı
Yok
Maksimum Çalışma Basıncı
10 bar
Bitirme
Nikel
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
This pneumatic straight union tube-to-tube adapter from RS PRO is easily configured with a one-touch push-to-connect action. As it can handle high pressures, this connector can be found in gas cylinders and for oxygen supplies.
Disconnections are simple as you just push the polyoxymethylene sleeve and then remove the tube from the fitting. Teflon-coated threads give a secure fit and easy coupling. It can be used in dry air systems as it has an operating pressure of up to 10 bar. Its nickel-plated brass body protects it from rust and corrosion. This tube-to-tube adapter works at temperatures up to +60°C and its thermoplastic material provides insulation and abrasion resistance. You can use this straight union connector in tightly-spaced pneumatic piping as it has a six-angle wrench.
This straight union connector is commonly used in car motors or compressors. It has been approved by RS PRO, to ensure durability and consistency.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Pack of 10) (KDV Hariç)
10
Teklif İsteyiniz
Each (In a Pack of 10) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
10
Teknik Belgeler
Özellikler
Marka
RS ProÜrün Tipi
Pnömatik Bağlantı Elemanı
Alt Tip
Rakor Düz
Bağlantı Tipi A
İterek Sokma
Bağlantı Boyutu A
10 mm
Bağlantı Boyutu B
10 mm
Bağlantı Tipi B
İterek Sokma
Minimum Çalışma Sıcaklığı
0°C
Malzeme
Polioksimetilen
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
No
Gıda sınıfı
Yok
Kimyasal Maddelere Dayanıklı
Yok
Maksimum Çalışma Basıncı
10 bar
Bitirme
Nikel
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
This pneumatic straight union tube-to-tube adapter from RS PRO is easily configured with a one-touch push-to-connect action. As it can handle high pressures, this connector can be found in gas cylinders and for oxygen supplies.
Disconnections are simple as you just push the polyoxymethylene sleeve and then remove the tube from the fitting. Teflon-coated threads give a secure fit and easy coupling. It can be used in dry air systems as it has an operating pressure of up to 10 bar. Its nickel-plated brass body protects it from rust and corrosion. This tube-to-tube adapter works at temperatures up to +60°C and its thermoplastic material provides insulation and abrasion resistance. You can use this straight union connector in tightly-spaced pneumatic piping as it has a six-angle wrench.
This straight union connector is commonly used in car motors or compressors. It has been approved by RS PRO, to ensure durability and consistency.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
