Seeit SUPERPRO-610P, Evrensel IC Yonga Cihazı Programlayıcı
Teknik Belgeler
Özellikler
Marka
SeeitÜrün Tipi
Universal Programmer
Alt Tip
Universal Programmer
Şununla Birlikte Kullanım İçin
EPROM, PLDs, ARM9 32 bit MCU, FLASH
Kit İçeriği
In-Circuit Debugger/Programmer, Cable
Programmer Name
SUPERPRO-610P
Arabirim Tipi
USB 2.0
Standartlar/Onaylar
No
Menşe
China
Ürün Ayrıntıları
SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0
The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.
PC Based Programmers
Stok bilgileri geçici olarak kullanılamıyor.
61.734,95 TL
61.734,95 TL Each (KDV Hariç)
74.081,94 TL
74.081,94 TL Each KDV Dahil
1
61.734,95 TL
61.734,95 TL Each (KDV Hariç)
74.081,94 TL
74.081,94 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
SeeitÜrün Tipi
Universal Programmer
Alt Tip
Universal Programmer
Şununla Birlikte Kullanım İçin
EPROM, PLDs, ARM9 32 bit MCU, FLASH
Kit İçeriği
In-Circuit Debugger/Programmer, Cable
Programmer Name
SUPERPRO-610P
Arabirim Tipi
USB 2.0
Standartlar/Onaylar
No
Menşe
China
Ürün Ayrıntıları
SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0
The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.
PC Based Programmers