Flasher Portable PLUS ISP,ARM,RX,PowerPC

Flasher Portable PLUS Programmer

Flasher Portable PLUS has been designed to fill the need for a portable, battery-operated production-grade Flash memory programmer used for in-field firmware updates. Initial setup/preparation for stand-alone mode operation is done via the J-Flash software. It supports storage of multiple configurations/image files, so one unit can be used for different targets. The Flasher Portable PLUS represents a significant upgrade to its predecessor, the Flasher Portable.

Supported Processors

• ARM 7/9/11; ARM Cortex-A5/A7/A8/A9/A12/A15/A17; ARM Cortex-M0/M0+/M1/M3/M4/M7; ARM Cortex-R4/R5; Freescale e200z0 (PowerPC); Renesas RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T

Features

• Stand-alone in-circuit-programmer; Powered by 680mAh rechargeable Li-Ion battery or USB; Up to 10 hours programming with one battery charge; Stores up to eight configurations/data files; 1.8in LCD panel for display of programming status; Pushbutton selects between stored images/configurations; 128MB memory for configuration and data file storage; Supports internal and external Flash devices; Data files can be updated via mass storage or via J-Flash; Host interface: USB 2.0; Target interfaces: 20-pin JTAG/SWD/FINE/SPD; Programming speed typically between 30KB/sec and 1MB/sec; Max programming speed depends on target hardware and max programming speed of the Flash memory; Authorized Flashing limits number of programming cycles and protects against non-authorized access; Dimensions: 126 x 70 x 28mm; Free software updates, 1 year of support

Supplied with

20-pin 0.1in target ribbon cable, USB cable