Teknik Belgeler
Özellikler
Marka
StarTech.comÜrün Tipi
USB Uzatıcı
USB Teknik Özelliği
USB 2.0
USB Bağlantı Noktalarının Sayısı
1
Aktarım Yöntemi
Galvanic Isolation
Güç Tüketimi
500mW
Standartlar/Onaylar
CE/LVD (2014/35/EU), IEC/EN 62368-1
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
This USB extender provides galvanic isolation for a single USB connection to prevent direct electrical continuity between host and device. Designed for USB 2.0 data rates, it enables isolated USB data transmission in environments where separation between circuits is required. The unit is intended for integration into automation, electronics and electrical workflows where signal integrity and isolation are necessary.
It maintains USB 2.0 signalling so standard high-speed and full-speed peripherals operate without protocol conversion while providing galvanic separation.
The unit draws up to 500 mW, so power budgeting should account for this additional low-power load when designing supply arrangements.
The unit adheres to CE LVD directives and the IEC/EN 62368-1 standard, indicating conformity with recognised electrical safety norms.
It provides a single USB port for one downstream device, suited to single-channel isolated connections.
Stok bilgileri geçici olarak kullanılamıyor.
5.861,45 TL
5.861,45 TL Each (KDV Hariç)
7.033,74 TL
7.033,74 TL Each KDV Dahil
1
5.861,45 TL
5.861,45 TL Each (KDV Hariç)
7.033,74 TL
7.033,74 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
StarTech.comÜrün Tipi
USB Uzatıcı
USB Teknik Özelliği
USB 2.0
USB Bağlantı Noktalarının Sayısı
1
Aktarım Yöntemi
Galvanic Isolation
Güç Tüketimi
500mW
Standartlar/Onaylar
CE/LVD (2014/35/EU), IEC/EN 62368-1
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
This USB extender provides galvanic isolation for a single USB connection to prevent direct electrical continuity between host and device. Designed for USB 2.0 data rates, it enables isolated USB data transmission in environments where separation between circuits is required. The unit is intended for integration into automation, electronics and electrical workflows where signal integrity and isolation are necessary.
It maintains USB 2.0 signalling so standard high-speed and full-speed peripherals operate without protocol conversion while providing galvanic separation.
The unit draws up to 500 mW, so power budgeting should account for this additional low-power load when designing supply arrangements.
The unit adheres to CE LVD directives and the IEC/EN 62368-1 standard, indicating conformity with recognised electrical safety norms.
It provides a single USB port for one downstream device, suited to single-channel isolated connections.