Teknik Belgeler
Özellikler
Marka
STMicroelectronicsÜrün Tipi
Gösterge Sürücüsü
Maksimum Çıkış Gücü
100W
Giriş Gerilimi
10.5 to 22.5 V
Montaj Tipi
Yüzey
Alt Tip
LED Sürücü
Terminal Tipi
Lehim
Çalışma Modları
Geçiş Modu
Sürücü Akımı
5.5 mA
LED Voltajı
0/1.5 V
Standartlar/Onaylar
EN 61000-3-2
Seri
HVLED007
Çıkışların Sayısı
5
Güç Kaybı
0.65W
Menşe
Morocco
Ürün Ayrıntıları
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (On a Reel of 2500) (KDV Hariç)
2500
Teklif İsteyiniz
Each (On a Reel of 2500) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
2500
Teknik Belgeler
Özellikler
Marka
STMicroelectronicsÜrün Tipi
Gösterge Sürücüsü
Maksimum Çıkış Gücü
100W
Giriş Gerilimi
10.5 to 22.5 V
Montaj Tipi
Yüzey
Alt Tip
LED Sürücü
Terminal Tipi
Lehim
Çalışma Modları
Geçiş Modu
Sürücü Akımı
5.5 mA
LED Voltajı
0/1.5 V
Standartlar/Onaylar
EN 61000-3-2
Seri
HVLED007
Çıkışların Sayısı
5
Güç Kaybı
0.65W
Menşe
Morocco
Ürün Ayrıntıları
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.