STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Name: STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin
Brand: STMicroelectronics
SKU: 1908454
Availability: LimitedAvailability

RS Stok Numarası: 190-8454Marka: STMicroelectronicsÜretici Parça Numarası: STTS751-1DP3F

Tümünü Sıcaklık ve Nem Sensörleri içinde gör

Teknik Belgeler

Özellikler

Marka

STMicroelectronics

Ürün Tipi

Sıcaklık ve Nem Sensörü

Çıkış Tipi

Dijital

Alt Tip

Sıcaklık Sensörü

Arabirim Tipi

SMBus

Doğruluk

±2.5 %

Montaj Tipi

Yüzey

Pim Sayısı

Maksimum Çalışma Sıcaklığı

125°C

Minimum Çalışma Sıcaklığı

-40°C

Minimum Besleme Gerilimi

2.25V

Maksimum Besleme Gerilimi

3.6V

Paket Tipi

UDFN

Uzunluk

2.05mm

Yükseklik

0.5mm

Standartlar/Onaylar

Seri

MCP9701T

Otomotiv Standardı

Ürün Ayrıntıları

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Tümünü Sıcaklık ve Nem Sensörleri içinde gör

Stok bilgileri geçici olarak kullanılamıyor.

102.366,00 TL

34,122 TL Each (On a Reel of 3000) (KDV Hariç)

122.839,20 TL

40,946 TL Each (On a Reel of 3000) KDV Dahil

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

102.366,00 TL

34,122 TL Each (On a Reel of 3000) (KDV Hariç)

122.839,20 TL

40,946 TL Each (On a Reel of 3000) KDV Dahil

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Stok bilgileri geçici olarak kullanılamıyor.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Teknik Belgeler

Özellikler

Marka

STMicroelectronics

Ürün Tipi

Sıcaklık ve Nem Sensörü

Çıkış Tipi

Dijital

Alt Tip

Sıcaklık Sensörü

Arabirim Tipi

SMBus

Doğruluk

±2.5 %

Montaj Tipi

Yüzey

Pim Sayısı

Maksimum Çalışma Sıcaklığı

125°C

Minimum Çalışma Sıcaklığı

-40°C

Minimum Besleme Gerilimi

2.25V

Maksimum Besleme Gerilimi

3.6V

Paket Tipi

UDFN

Uzunluk

2.05mm

Yükseklik

0.5mm

Standartlar/Onaylar

Seri

MCP9701T

Otomotiv Standardı

Ürün Ayrıntıları

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more