TE Connectivity Saydam, Poliolefin Lehimli Makaron, 4 → 11,5mm, 35,5mm Uzunluğunda
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Alt Tip
Terminator
Manşon Uzunluğu
35.5mm
Malzeme
Poliolefin
Dielektrik Dayanımı
2kV
Minimum Kablo Çapı
4mm
Maksimum Kablo Çapı
11.5mm
Renk
Saydam
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Pack of 25) (KDV Hariç)
25
Teklif İsteyiniz
Each (In a Pack of 25) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
25
Teknik Belgeler
Özellikler
Marka
TE ConnectivityÜrün Tipi
Solder Sleeve
Alt Tip
Terminator
Manşon Uzunluğu
35.5mm
Malzeme
Poliolefin
Dielektrik Dayanımı
2kV
Minimum Kablo Çapı
4mm
Maksimum Kablo Çapı
11.5mm
Renk
Saydam
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
125°C
Standartlar/Onaylar
ANSI J-STD-004, ANSI J-STD-006
Büzülme Sıcaklığı
85°C
Seri
B-155
Menşe
Mexico
Ürün Ayrıntıları
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.