TE Connectivity Saydam, Poliolefin Lehimli Makaron, 6,5 → 15,1mm, 45,5mm Uzunluğunda

RS Stok Numarası: 542-5735Marka: TE ConnectivityÜretici Parça Numarası: B-155-13
brand-logo

Teknik Belgeler

Özellikler

Ürün Tipi

Solder Sleeve

Alt Tip

Terminator

Manşon Uzunluğu

45.5mm

Malzeme

Poliolefin

Dielektrik Dayanımı

2kV

Minimum Kablo Çapı

6.5mm

Maksimum Kablo Çapı

15.1mm

Renk

Saydam

Minimum Çalışma Sıcaklığı

-55°C

Maksimum Çalışma Sıcaklığı

125°C

Standartlar/Onaylar

ANSI J-STD-004, ANSI J-STD-006

Büzülme Sıcaklığı

85°C

Seri

B-155

Menşe

Mexico

Ürün Ayrıntıları

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

İlginizi çekebilir

Stok bilgileri geçici olarak kullanılamıyor.

Teklif İsteyiniz

TE Connectivity Saydam, Poliolefin Lehimli Makaron, 6,5 → 15,1mm, 45,5mm Uzunluğunda

sticker-359

Teklif İsteyiniz

TE Connectivity Saydam, Poliolefin Lehimli Makaron, 6,5 → 15,1mm, 45,5mm Uzunluğunda

Stok bilgileri geçici olarak kullanılamıyor.

sticker-359
İlginizi çekebilir

Teknik Belgeler

Özellikler

Ürün Tipi

Solder Sleeve

Alt Tip

Terminator

Manşon Uzunluğu

45.5mm

Malzeme

Poliolefin

Dielektrik Dayanımı

2kV

Minimum Kablo Çapı

6.5mm

Maksimum Kablo Çapı

15.1mm

Renk

Saydam

Minimum Çalışma Sıcaklığı

-55°C

Maksimum Çalışma Sıcaklığı

125°C

Standartlar/Onaylar

ANSI J-STD-004, ANSI J-STD-006

Büzülme Sıcaklığı

85°C

Seri

B-155

Menşe

Mexico

Ürün Ayrıntıları

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

İlginizi çekebilir