Teknik Belgeler
Özellikler
Marka
TranscendBellek Boyutu
512Gb
Ürün Tipi
SSD
Alt Tip
SSD
Dahili/Harici
Dahili
Form Faktörü
M.2
Endüstriyel Sınıf
Evet
NAND Tipi
3D TLC
Şifreleme Düzeyi
256 Bit AES Encryption
Arabirim Tipi
NVMe PCIe Gen 4 x4
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
75°C
Yükseklik
3.58mm
Uzunluk
80mm
Standartlar/Onaylar
UKCA
Genişlik
22 mm
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
This SSD is an internal high-performance storage device designed for demanding industrial and workstation environments. It connects via an NVMe PCIe Gen4 x4 Interface to deliver Rapid data transfer and low-latency access. Built for use in automation, electronics and mechanical systems, it supports operation across a wide temperature range and includes hardware-level data protection.
It uses an M.2 form factor with an 80mm length and 22mm width, compatible with M.2 2280 slots that accept low-profile drives.
The drive is specified to operate up to 75°C, allowing deployment in enclosures or cabinets where higher thermal conditions occur.
It is designed as an internal storage solution for installation inside workstations and industrial equipment.
The device employs 3D NAND, which increases storage density and endurance compared with Planar NAND, beneficial for sustained write workloads.
It carries the UKCA approval, indicating conformity with applicable United Kingdom regulations.
Stok bilgileri geçici olarak kullanılamıyor.
42.717,92 TL
42.717,92 TL Each (KDV Hariç)
51.261,50 TL
51.261,50 TL Each KDV Dahil
1
42.717,92 TL
42.717,92 TL Each (KDV Hariç)
51.261,50 TL
51.261,50 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
TranscendBellek Boyutu
512Gb
Ürün Tipi
SSD
Alt Tip
SSD
Dahili/Harici
Dahili
Form Faktörü
M.2
Endüstriyel Sınıf
Evet
NAND Tipi
3D TLC
Şifreleme Düzeyi
256 Bit AES Encryption
Arabirim Tipi
NVMe PCIe Gen 4 x4
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
75°C
Yükseklik
3.58mm
Uzunluk
80mm
Standartlar/Onaylar
UKCA
Genişlik
22 mm
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
This SSD is an internal high-performance storage device designed for demanding industrial and workstation environments. It connects via an NVMe PCIe Gen4 x4 Interface to deliver Rapid data transfer and low-latency access. Built for use in automation, electronics and mechanical systems, it supports operation across a wide temperature range and includes hardware-level data protection.
It uses an M.2 form factor with an 80mm length and 22mm width, compatible with M.2 2280 slots that accept low-profile drives.
The drive is specified to operate up to 75°C, allowing deployment in enclosures or cabinets where higher thermal conditions occur.
It is designed as an internal storage solution for installation inside workstations and industrial equipment.
The device employs 3D NAND, which increases storage density and endurance compared with Planar NAND, beneficial for sustained write workloads.
It carries the UKCA approval, indicating conformity with applicable United Kingdom regulations.